None 17831HD Manuál s instrukcemi stáhnout pdf

OPEN

GE Christmas Trees

with Easy Light Technology

™

eliminates cord connections

Just assemble and decorate!

16.7"X11.2"

Distributed by Nicolas Holiday Inc.,

For indoor use only

2015 Nicolas Holiday Inc.,

9 F., No. 37, Guangfu North Rd.

Taipei, Taiwan 10560

THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.

Printed in China

HG15-LED-ONEPLUG

Nicolas Holiday Inc. thanks you for your purchase of this pre-lit

Christmas tree. With proper use and care, your Christmas tree

will provide years of use and memories.

Carefully follow the instructions below on how to assemble and

disassemble your pre-lit Christmas tree.

If you should have any problems with your tree, or if the tree

does not light after assembly, DO NOT return it to the place of

purchase. Please refer to the troubleshooting section of this

manual or call our toll free number: 1-877-398-7337 and a

customer support representative will assist you.

Our customer support center is open Monday through

Friday 10AM to 7PM EST with additional hours throughout

the holiday season:

November 14th to December 23rd:

Monday-Friday 8AM to 8PM EST,

Saturday-Sunday: 10AM to 7PM EST

You may also visit us on the web at www.geholidaylighting.com

Enjoy your holiday!

Tree Storage

1. Remove the tree’s main extension cord plug from

the wall outlet.

2. Starting at the top, disconnect the top and section

Step A: Gently fold the branches up toward the center.

Care Should be taken to avoid damage to the lights.

3. Disconnect sections

B and A .

4. Refer to the drawing

on how to repack

your tree.

Important: Store your carton neatly in a cool, dry location

protected from sunlight to prolong the tree life and to

better keep the light sets in working order. Do not place a

heavy load on the carton to avoid damage to or crushing

the carton and tree inside.

TOP

tree

top

tree stand

A B

TREE ASSEMBLY DIAGRAM

Remove and unwrap all parts.

Retain shipping carton for repacking.

For proper installation and use, the

tree must be set up in a clear area

without any obstructions and on a

flat surface.

NOTE:

Before opening stand, be certain the

thumbscrew is loosened, so it does not

interfere with opening legs.

Place stand in desired location before

assembling. Your assembled tree will

be heavy and

difficult to move.

Open tree stand.

Tighten screw to

secure section A

in the tree stand.

Untie RED twist-tie to release

branch panels.

Hint:

if your

branches do not fall

into place, DO NOT

force down. Gently

lift up on the branch

panels to release

the branch from its

locked position.

Now, all

rows of branches should be in the open

position.

Before adding the next section, follow the

shaping instructions listed below in NOTE.

NOTE: For a natural uniform look, position

some branches

outward and

some upward.

Repeat for each

branch panel

and each

tree section.

Assemble section B into section A.

Align pole sections along the

indicated white marks.

Firmly seat both sections together.

Hold tree top with one

hand as shown. Gently

pull down the outer

layer of branches, and

fully insert tree top

into the top of the

pole on section B. (or C)

Align along the indicated

white marks.

To illuminate your tree, insert the

extension cord plug

directly into an

electrical wall outlet.

If needed, adjust

branch tips to make

the tree look fuller.

Congratulations!

Your tree is complete

and ready to

decorate.

Insert section A

into tree stand, after

first removing

red protective cap.

7.5 FT

TOP

TREE

STAND

Repeat step 3.

Most Frequently Asked Questions

Q. May I add a lighted, decorative tree top to my tree?

A. Yes, There is an outlet on the back of the bladed

plug of the tree top.

Q. May I put blinking or flashing bulbs on my tree?

A. No

Q. May I add extra string sets to my pre-lit tree?

A. No

Q. May I put my pre-lit tree outside?

A. No. Pre-lit trees are for indoor use only.

Q. May I hang glass ornaments on a pre-lit tree?

A. Yes, however, do not hang directly on the wires

of the lights.

Q. May I remove a light string bulb and add a pig

tailed illuminated or animated ornament or motor?

A. No, removing the bulbs and inserting any additional

device into a lamp holder will cause the light set to

cease to operate and may revoke the limited

warranty of this product.

Disclaimer : DO NOT USE OR INSTALL ANY ADDITIONAL

CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS

RESULT IN DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE

PERSONAL INJURY. DOING THIS, WILL RESULT IN A VOID OF

THE LIMITED WARRANTY OF THIS PRODUCT.

NOTE: Remove twist tie around looped

wires with plug adapter, extend wire and

set aside.

Trouble Shooting Tips

1. If tree does not illuminate, try stepping on the On/Off FOOT

PEDAL. If the tree is plugged into a switch controlled wall outlet,

make sure the switch is turned ON.

2. If one section of your tree does not illuminate, check that

section for loose or missing LEDs, all factory connections are

properly made or that you properly made all the electrical

connections between each tree section.

3. Also, check that connector on the main plug is fully secured.

4. All sections need to fully insert together and align along the

indicated white marks.

Spare Parts: Your tree includes a plastic bag containing

spare LEDs.

1 2

7,5 PIES ( 2,29 M) 2

Shrnutí obsahu

Strany 1

OPENGE Christmas Treeswith Easy Light Technology™eliminates cord connectionsJust assemble and decorate! 16.7"X11.2"Distributed by Nicolas Ho

Strany 2 - 7,5 PIES ( 2,29 M)

ABRIRÁrboles de navidad GE con tecnología Easy Light Technology™para eliminar las conexiones de cables¡Simplemente ensámblelo y decórelo!16.7"X11

Další dokumenty pro ne None 17831HD

Zobrazit dokument None 17831HD Návod k použití a péči

None 17831HD Návod k použití a péči (2 stránky)

Komentáře k této Příručce

Žádné komentáře

None 17831HD Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro ne None 17831HD. none 17831HD Instructions / Assembly Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro ne None 17831HD

Komentáře k této Příručce

Související produkty a manuály pro ne None 17831HD